www.herald-journal.com
Herald Journal Legal Notices
New public notices published in the issue of May 1, 2020

Howard Lake 2019 Drinking Water ReportMaking Safe Drinking Water
Your drinking water comes from a groundwater source: two wells ranging from 131 to 148 feet deep, that draw water from the Quaternary Buried Artesian aquifer.
Howard Lake works hard to provide you with safe and reliable drinking water that meets federal and state water quality requirements. The purpose of this report is to provide you with information on your drinking water and how to protect our precious water resources.
Contact Troy Zwilling, Public Works Lead, at 320-583-2332 or Troy.Zwilling@howard-lake.mn.us if you have questions about Howard Lake’s drinking water. You can also ask for information about how you can take part in decisions that may affect water quality.
The U.S. Environmental Protection Agency sets safe drinking water standards. These standards limit the amounts of specific contaminants allowed in drinking water. This ensures that tap water is safe to drink for most people. The U.S. Food and Drug Administration regulates the amount of certain contaminants in bottled water. Bottled water must provide the same public health protection as public tap water.
Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that water poses a health risk. More information about contaminants and potential health effects can be obtained by calling the Environmental Protection Agency’s Safe Drinking Water Hotline at 1-800-426-4791.
Howard Lake Monitoring Results
This report contains our monitoring results from January 1 to December 31, 2019.
We work with the Minnesota Department of Health to test drinking water for more than 100 contaminants. It is not unusual to detect contaminants in small amounts. No water supply is ever completely free of contaminants. Drinking water standards protect Minnesotans from substances that may be harmful to their health.
Learn more by visiting the Minnesota Department of Health’s webpage Basics of Monitoring and testing of Drinking Water in Minnesota (https://www.health.state.mn.us/communities/environment/water/factsheet/sampling.html).
How to Read the Water Quality Data Tables
The tables below show the contaminants we found last year or the most recent time we sampled for that contaminant. They also show the levels of those contaminants and the Environmental Protection Agency’s limits. Substances that we tested for but did not find are not included in the tables.
We sample for some contaminants less than once a year because their levels in water are not expected to change from year to year. If we found any of these contaminants the last time we sampled for them, we included them in the tables below with the detection date.
We may have done additional monitoring for contaminants that are not included in the Safe Drinking Water Act. To request a copy of these results, call the Minnesota Department of Health at 651-201-4700 or 1-800-818-9318 between 8:00 a.m. and 4:30 p.m., Monday through Friday.
Definitions
• AL (Action Level): The concentration of a contaminant which, if exceeded, triggers treatment or other requirements which a water system must follow.
• EPA: Environmental Protection Agency
• MCL (Maximum contaminant level): The highest level of a contaminant that is allowed in drinking water. MCLs are set as close to the MCLGs as feasible using the best available treatment technology.
• MCLG (Maximum contaminant level goal): The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs allow for a margin of safety.
• MRDL (Maximum residual disinfectant level): The highest level of a disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants.
• MRDLG (Maximum residual disinfectant level goal): The level of a drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contaminants.
• N/A (Not applicable): Does not apply.
• ppb (parts per billion): One part per billion in water is like one drop in one billion drops of water, or about one drop in a swimming pool. ppb is the same as micrograms per liter (µg/l).
• ppm (parts per million): One part per million is like one drop in one million drops of water, or about one cup in a swimming pool. ppm is the same as milligrams per liter (mg/l).
• PWSID: Public water system identification.
Potential Health Effects and Corrective Actions (If Applicable)
Fluoride: Fluoride is nature’s cavity fighter, with small amounts present naturally in many drinking water sources. There is an overwhelming weight of credible, peer-reviewed, scientific evidence that fluoridation reduces tooth decay and cavities in children and adults, even when there is availability of fluoride from other sources, such as fluoride toothpaste and mouth rinses. Since studies show that optimal fluoride levels in drinking water benefit public health, municipal community water systems adjust the level of fluoride in the water to a concentration between 0.5 to 1.5 parts per million (ppm), with an optimal fluoridation goal between 0.7 and 1.2 ppm to protect your teeth. Fluoride levels below 2.0 ppm are not expected to increase the risk of a cosmetic condition known as enamel fluorosis.
Some People Are More Vulnerable to Contaminants in Drinking Water
Some people may be more vulnerable to contaminants in drinking water than the general population. Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/AIDS or other immune system disorders, some elderly, and infants can be particularly at risk from infections. The developing fetus and therefore pregnant women may also be more vulnerable to contaminants in drinking water. These people or their caregivers should seek advice about drinking water from their health care providers. EPA/Centers for Disease Control (CDC) guidelines on appropriate means to lessen the risk of infection by Cryptosporidium and other microbial contaminants are available from the Safe Drinking Water Hotline at 1-800-426-4791.
Learn More about Your Drinking Water
Drinking Water Sources
Minnesota’s primary drinking water sources are groundwater and surface water. Groundwater is the water found in aquifers beneath the surface of the land. Groundwater supplies 75 percent of Minnesota’s drinking water. Surface water is the water in lakes, rivers, and streams above the surface of the land. Surface water supplies 25 percent of Minnesota’s drinking water.
Contaminants can get in drinking water sources from the natural environment and from people’s daily activities. There are five main types of contaminants in drinking water sources.
• Microbial contaminants, such as viruses, bacteria, and parasites. Sources include sewage treatment plants, septic systems, agricultural livestock operations, pets, and wildlife.
• Inorganic contaminants include salts and metals from natural sources (e.g. rock and soil), oil and gas production, mining and farming operations, urban stormwater runoff, and wastewater discharges.
• Pesticides and herbicides are chemicals used to reduce or kill unwanted plants and pests. Sources include agriculture, urban stormwater runoff, and commercial and residential properties.
• Organic chemical contaminants include synthetic and volatile organic compounds. Sources include industrial processes and petroleum production, gas stations, urban stormwater runoff, and septic systems.
• Radioactive contaminants such as radium, thorium, and uranium isotopes come from natural sources (e.g. radon gas from soils and rock), mining operations, and oil and gas production.
The Minnesota Department of Health provides information about your drinking water source(s) in a source water assessment, including:
• How Howard Lake is protecting your drinking water source(s);
• Nearby threats to your drinking water sources;
• How easily water and pollution can move from the surface of the land into drinking water sources, based on natural geology and the way wells are constructed.
Find your source water assessment at Source Water Assessments (https://www.health.state.mn.us/communities/environment/water/swp/swa) or call 651-201-4700 or 1-800-818-9318 between 8:00 a.m. and 4:30 p.m., Monday through Friday.
Lead in Drinking Water
You may be in contact with lead through paint, water, dust, soil, food, hobbies, or your job. Coming in contact with lead can cause serious health problems for everyone. There is no safe level of lead. Babies, children under six years, and pregnant women are at the highest risk.
Lead is rarely in a drinking water source, but it can get in your drinking water as it passes through lead service lines and your household plumbing system. Howard Lake is responsible for providing high quality drinking water, but it cannot control the plumbing materials used in private buildings.
Read below to learn how you can protect yourself from lead in drinking water.
1. Let the water run for 30-60 seconds before using it for drinking or cooking if the water has not been turned on in over six hours. If you have a lead service line, you may need to let the water run longer. A service line is the underground pipe that brings water from the main water pipe under the street to your home.
• You can find out if you have a lead service line by contacting your public water system, or you can check by following the steps at: https://www.mprnews.org/story/2016/06/24/npr-find-lead-pipes-in-your-home
• The only way to know if lead has been reduced by letting it run is to check with a test. If letting the water run does not reduce lead, consider other options to reduce your exposure.
2. Use cold water for drinking, making food, and making baby formula. Hot water releases more lead from pipes than cold water.
3. Test your water. In most cases, letting the water run and using cold water for drinking and cooking should keep lead levels low in your drinking water. If you are still concerned about lead, arrange with a laboratory to test your tap water. Testing your water is important if young children or pregnant women drink your tap water.
• Contact a Minnesota Department of Health accredited laboratory to get a sample container and instructions on how to submit a sample: Environmental Laboratory Accreditation Program (https://eldo.web.health.state.mn.us/public/accreditedlabs/labsearch.seam) The Minnesota Department of Health can help you understand your test results.
4. Treat your water if a test shows your water has high levels of lead after you let the water run.
• Read about water treatment units: Point-of-Use Water Treatment Units for Lead Reduction (https://www.health.state.mn.us/communities/environment/water/factsheet/poulead.html)
Learn more:
• Visit Lead in Drinking Water (https://www.health.state.mn.us/communities/environment/water/contaminants/lead.html)
• Visit Basic Information about Lead in Drinking Water (http://www.epa.gov/safewater/lead)
• Call the EPA Safe Drinking Water Hotline at 1-800-426-4791.To learn about how to reduce your contact with lead from sources other than your drinking water, visit Lead Poisoning Prevention: Common Sources (https://www.health.state.mn.us/communities/environment/lead/sources.html).
Published in the Herald Journal, May 1, 2020.
Notice of Public Hearing
Notice is hereby given, that on Tuesday, May 12, 2020 the Middleville Township Board of Adjustment will hold a hearing at the Middleville Township Hall at 7:00 pm to consider the following item:
James and Jeanette Fiedler are requesting a lot line variance. They wish to reduce their 5 acre building site at 586 Co Rd 5 SW, PID 212-000-053201, down to 3 acres. This requires a variance because the rear line would only be 25 feet from the shed and by ordinance the rear setback is 50 feet. This property is part of the SW quarter of Section 5, Middleville Township, Wright County.
Such persons that desire to be heard with reference to the proposed variance will be heard at this time. If you do not attend the hearing or submit written comment, it will be assumed that you have no objections to the proposal.
Middleville Board of Adjustment
Joey Berg, Clerk
Published in the Herald Journal, May 1 and 8, 2020.
Notice of Public Hearing
Notice is hereby given, that on Tuesday, May 12, 2020 the Middleville Township Board of Adjustment will hold a hearing at the Middleville Township Hall at 7:00 pm to consider the following item:
Arvid and Violet Luhman are requesting a lot size variance. They wish to split their 160 acre farm at 5384 Co Rd 7 SW, PID 212-000-352300, in to 5 parcels, of which 4 will contain one building entitlement. The parcel which will contain the existing building site will be about 24 acres and 2 others will be 20 acres. Ordinance allows up to 10 acres for a building site, thus the need for variance. This property is the NW quarter of Section 35, Middleville Township, Wright County.
Such persons that desire to be heard with reference to the proposed variance will be heard at this time. If you do not attend the hearing or submit written comment, it will be assumed that you have no objections to the proposal.
Middleville Board of Adjustment
Joey Berg, Clerk
Published in the Herald Journal, May 1 and 8, 2020.
2020 NOTICE OF OFFICES TO BE VOTED FOR AT THE STATE GENERAL ELECTION
The following is the notice of federal, state and county offices that will be voted for at the state general election to be held on Tuesday, November 3, 2020. The filing period for United States Senator, United States Representative, State Senator, State Representative, Associate Justice of the Supreme Court, Judge of the Minnesota Court of Appeals, Judge of the District Court, Wright County Commissioner and Wright County Soil & Water Conservation Supervisor begins at 8:00 a.m. on Tuesday, May 19, 2020, and ends at 5:00 p.m., Tuesday, June 2, 2020. Note: Filing offices will be closed Monday, May 25, 2020 in observance of Memorial Day.
The place of filing for federal offices is the Office of the Secretary of State, State Office Building, Room 180, 100 Rev. Dr. Martin Luther King Jr. Blvd., St. Paul, MN 55155-1299. The place of filing for state offices is with the Office of the Secretary of State or with the county auditor of the county in which the candidate resides.
The place of filing for County offices is with the Wright County Auditor/Treasurer at the Wright County Government Center, 10 2nd Street NW, Room 230, Buffalo, MN 55313. Regular business hours are 8:00 a.m. to 4:30 p.m.
Candidates may file in person or by mail, if the filing is received during the filing period. Candidates who will be absent from the state during the filing period and meet the requirements of Minnesota Statutes section 204B.09, subdivision 1a, may arrange to file during the seven days immediately preceding the candidate’s absence from the state. This notice is sent based on current law. Be aware that the Legislature and/or the Governor may take actions that could affect some of these processes due to the COVID-19 situation. This notice is provided pursuant to Minnesota Statutes section 204B.33.
FEDERAL OFFICES
Presidential Electors (Ten)
United States Senator (One)
United States Representative (One office per district)
District Counties
6 Anoka, Benton, Carver, Hennepin, Sherburne,
Stearns, Washington, Wright
STATE OFFICESLEGISLATIVE OFFICES
State Senator (One office per district)
District Counties
15 Benton, Kanabec, Mille Lacs, Morrison, Sherburne, Wright
18 McLeod, Meeker, Sibley, Wright
30 Hennepin, Sherburne, Wright
State Representative (One office per district)
District Counties
15B Benton, Morrison, Sherburne, Wright
18A McLeod, Meeker, Wright
29A Hennepin, Wright
29B Wright
30A Sherburne, Wright
30B Hennepin, Wright
JUDICIAL OFFICES
Candidates for judicial office may file either with the Office of the Minnesota Secretary of State or with the County Auditor in the county where the candidate resides. A Candidate filing for one of the Minnesota Court of Appeals seats that has been designated for one of the congressional districts must be a resident of that congressional district.
Supreme Court
Associate Justice (One Seat)
Seat # Incumbent:
4 (Paul Thissen)
Court of Appeals (Four Seats)
Appellate offices are elected statewide. Where designated, candidates must reside in the congressional district listed for at least one year.
Seat # Incumbent:
3 (2nd Congressional District) (Carol A. Hooten)
9 (7th Congressional District) (Randall J. Slieter)
13 (6th Congressional District) (Jeanne M. Cochran)
15 (3rd Congressional District) (Kevin G. Ross)
District Courts
Tenth Judicial District: (20 Seats): Counties: Anoka, Chisago, Isanti, Kanabec, Pine, Sherburne, Washington, Wright
Seat # Incumbent:
1 (Juanita C. Freeman)
4 (Suzanne M. Brown)
5 (Douglas B. Meslow)
6 (Stoney L. Hiljus)
7 (Richard C. Ilkka)
8 (Laura A. Pietan)
9 (Sheridan K. Hawley)
14 (Nancy J. Logering)
15 (Thomas R. Lehmann)
17 (Patrick W. Flanagan)
22 (Melissa M. Saterbak)
23 (Catherine (Kate) M. McPherson)
24 (Karin L. McCarthy)
26 (Barry A. Sullivan)
28 (Karen B. Schommer)
32 (Elizabeth H. Strand)
35 (Ellen Louise Maas)
38 (Gregory G. Galler)
39 (Walter M. Kaminsky)
43 (Jonathan Neal Jasper)
COUNTY OFFICES
Wright County Commissioner – District 2 (4-year term)
Wright County Commissioner – District 4 (4-year term)
Wright County Commissioner – District 5 (4-year term)
Wright County Soil & Water Conservation Supervisor – District 1 (special election)
Wright County Soil & Water Conservation Supervisor – District 2
Wright County Soil & Water Conservation Supervisor – District 4
Wright County Soil & Water Conservation Supervisor – District 5
The filing fees are as follows:
U.S. Senator $400
U.S. Representative $300
Governor, Lt. Governor, Attorney General, State Auditor and Secretary of State $300
Judges $300
State Senator and State Representative $100
County Office $50
Soil and Water Conservation District Supervisor $20
ROBERT J. HIIVALA, WRIGHT COUNTY AUDITOR/TREASURER
Published in the Herald Journal, May 1 and 8, 2020.